Piller Drilling P4 / 40 Send Enquiry

20MM AUTO FEED DRILLING MACHINE

 

Specification - All Dimensions are in"mm"

Specification BDM/HD PDM/HD
Drilling Capacity in Steel 20mm 20mm
Tapping capacity in steel M12 M12
Morse taper in spindle MT2 MT2
Spindle traverse 130 130
Vertical adjustment of the spindle table 425 425
Pillar diameter Ø 80 Ø 80
Distance between center of spindle and column front 200 200
Max. Distance between spindle and table 485 485
Max. Distance between spindle and base 800 975
Table working surface Ø 300 Ø 300
Base working surface 385*375 385*375
No.of spindle speeds 10 10
Feed Hand / Auto Hand / Auto
No. of spindle speeds 3 3
Range of spindle feeds 0.07 - 0.15 - 0.30mm / revloution 0.07 - 0.15 - 0.30mm / revloution
Power of spindle drive motor 0.75kw / 1HP - 1425 rpm - 400/440 Volt AC, 3 phase 50hz  
Space occupied (H*W*L) 1500mm * 560* 820mm 1850* 560*820mm
Net weight 26Kgs 293Kgs
The machine will be supplied with motor and rotary switch.

Optional Accessories

  • Drill Chuck with Arbor & Key
  • Reduction Sleeves
  • Coolant Pump
  • Machine vice
  • Light Fittings
  • D.O.L Strater

NOTE :

  • The vertical adjustment of spindle head and table are manual.
  • As per our usual standard supply, the round table provided with coolant channel.
  • The machine also availble with following speed motors ON CUSTOMER request.
  • 1Hp 960 rpm motor:- 65-95-140-205-300-390-570-840-1230-1800rpm
  • 1Hp 720rpm motor :- 50-70-105-1500-225-300-425-360-930-1350rpm
  • By fixing 1Hp 720/1440 rpm dual speed motor - 50-71-105-155-225/300-426-630-930--1350rpm
  • By fixing 1Hp 720/1440 rpm dual speed motor - 100-142-210-310-450/600-852-1260-1440-1860-2700rpm
  • All dimensions and weights are approximate only. We reserve the weights to modify the illustrations and specifications without notice.