Piller Drilling P4 / 40 Send Enquiry

Piller Drilling Mahine P2/25/GT

Specification - All Dimensions are in"mm"

Drilling Capacity in Steel 25
Tapping Capacity M16
Morse Taper in Spindle MT3
Spindle Travels 140
Pillar Diametre 120
Distance between centre of Spindle & Column Front 260
Max. Distance between Spindle & Table 610
Max. Distance between Spindle & Table 1080
Table Working Surface Ø 335
Table vertical Transfer (manual) 470
Base Working Surface 318 X 300
No.of Spindle Speeds 10
Range of Spindle Speeds (rpm) 100-142-210-310-450
600-852-1260-1860-2700
Feeds Hand
No. of Spindle Feeds -
Range of Spindle Feeds -
Power of Drive motor 0.75kw/1HP, 1440rpm, 415 Volt, AC, 3Phase 50 Cycles
Space Occupied [L X B X H] 850 X 600 X 1975
Nett Weight 440 Kgs.
Gross Weight 670 Kgs.
The machine will be supplied with motors and rotary switch.

Extra Equipments

  • Drill Chuck
  • Coolant Pump
  • Light Fittings
  • Reduction Sleeves
  • Machine Vice
  • D.O.L Strater

Main features:

  • The machine also be supplied with the following speeds on customer's request at extra cost.
  • With 0.75kw/1 HP 960 rpm motor 65-95-140-205-300 390-570-840-1230-1800 rpm
  • With 0.75kw/1 HP 720/1440 rpm duall speed motor 50-72-105-155-225-300 / 426-630-930-1350 rpm
  • Motor[Dual Speed Motor] 100-142-210-310-450-600-852-1260-1860-2700 rpm
  • The machine can be supplied as gang drilling version also with number of drilling heads over a common table. Specification can be furnished on customer's request.

    • Note:

    • All dimensions weight are approximate only. Due to constant improvement and design the specification are subject to change without notice